Intermet Radford Foundry
Update: After January 6, 2017, information about this RCRA Corrective Action site
will be available at:
Corrective Action Sites Around the Nation - Region 3
(Search for the Facility by Name, Location, or EPA ID)
Please be sure to update your bookmarks.
On This Page
EPA Project Manager
Sharon D. Kenny
U.S. Environmental Protection Agency Region 3
1650 Arch Street MS 3LC40
Philadelphia, PA 19103-2029
Virginia Department of Environmental Quality
RCRA Remdial Project Manager
P.O. Box 1105
Richmond, VA 23218
VA DEQ Brownfields Program
P.O. Box 10009
Richmond, VA 23240-0009
In 2013, Virginia Casting Industries received a consent order from the VA Department of Environmental Quality regarding the VCI Radford Landfill for the purpose of resolving violations of the Virginia Waste Management Act.
As of November 2014, VCI has commenced construction of a final cover system for the industrial landfill for which VCI received a permit on May 2010.
In 2000, EPA and the VADEQ completed a site visit of the facility to review the status of one of the EPA Region III's high priority RCRA corrective action sites. The review of background data indicated that there has been a release of hazardous contaminants on site and that there is insufficient data to determine the extent of such release.
On 2002, EPA and Intermet entered into an RCRA Administrative Order on Consent to conduct an environmental investigation and clean up measures as necessary to protect human health and the environment. The adjacent facility, currently known as Greedy Holdings/Radford Foundry (VAD981730930) is included in the order due to the common ownership at the time.
In 2004, the facility completed the implementation of the Phase I RCRA Facility Investigation (RFI) Work Plan for the environmental investigation of the site wide groundwater and soils at high priority areas. The report recommended a Phase 2 investigation to investigate the rest of the site.
Intermet filed for bankruptcy in September 2004 and the submittal of the Phase II work plan was put on hold.
A Closure Report for SWMU 41 was received in November 2005. Closure of the New Landfill (SWMU 63) is currently being coordinated with VADEQ.
In 2009, Virginia Casting Industries (VCI) became the new owner of the site.
In 2010, EPA completed Phase II investigations through its Brownfield program. A final report was prepared in August 2012.
The VCI – Radford Foundry was developed in the 1890s for use as an iron foundry. Foundry operations have been present at the property since that time.
The Radford Foundry operated from 1966 until 2003 and produced automotive parts using the mold- casting production method. This process involved melting of scrap metal, coke, limestone, and various additives in a cupola at approximately 1537 °C. The molten iron was poured into molds of sand and binding resins, after which the mold was removed and the product finished.
In addition to the foundry operations, the Virginia Coke and Coal Company operated on the property from approximately 1910 until the 1940s. Based upon historical information, the operation included an engine house, machine shop, ore shed, oil house, and casting building and was located in the central western portion of the property.
Impacts to both soil and sediments resulting from historic uses of the property were identified in the Phase I and Phase II environmental assessments. Semi-volatile organic compounds (SVOCs) and metals were detected in soil at levels exceeding EPA Region III Regional Industrial Soil Standards. Polychlorinated biphenyls (PCBs), SVOCs and metals are present in sediment below the wastewater settling ponds at significant concentrations.
No institutional controls are currently in place.
- Some of the site’s key documents of interest are accessible below:
- Environmental Indicator Determination - Human Exposures [PDF, 20 pages, 920 KB, About PDF]
- Environmental Indicator Determination- Groundwater [PDF, 14 pages, 152 KB, About PDF]
- All documents and reports regarding this facility also can be reviewed in person at these locations:
U.S. EPA Region III
Land & Chemicals Division - RCRA
1650 Arch Street-11th Floor
Philadelphia, PA 19103
Call for an appointment.
- Submit a FOIA Request
Get instructions on how to submit a FOIA request. Additional fee for requests over 100 pages.
Intermet Radford Foundry
(Click on a thumbnail to enlarge the photo)
The facility is not under continued use.
The EPA is dedicated to providing you with timely and accurate information about our work at this site. If you have any questions or concerns, please contact the EPA Project Manager:
Sharon D. Kenny (215)814-3417.