Edgewater Steel Co.
EPA Project Manager
Office of Pennsylvania Remediation
U.S. Environmental Protection Agency - Region III
1650 Arch Street
Mail code: 3LC30
Philadelphia, PA 19103-202
This facility is one of EPA Region III's high priority RCRA corrective action sites. Edgewater Steel Co. clean closed an EAF dust waste pile in 1991 and closed in place a construction/demolition waste landfill in 1995. The facility shut down operations in 2001. In October, 2001 an environmental inspection was done. An EI report was prepared in March 2002. PADEP determined that with the removal of waste from the manufacturing buildings, the EI's would be under control (Sept. 2003). The buildings were demolished in 2005, but some waste (dust) was apparently disposed on site during demolition activities. Subsequent sampling in 2006 did not locate any dust or materials that exhibited a hazardous waste characteristic. Additionally as part of a PA Act 2 site characterization, limited TCE impacts to groundwater were found.
The site was divided into two parcels for remediation and redevelopment as residential, commercial and light industrial properties; the 32-acre Oakmont area and the 28 acre River Edge area. The Oakmont area remediation and redevelopment plan received PADEP Act 2 approval, and redevelopment is underway. The River Edge area is currently under remediation.
RCRA Corrective Action activities at this facility are being conducted under the direction of the State
There are no institutional controls at this time.
|Edgewater Steel Co. Interactive Map|
For more information about EPA’s corrective action webpage, including Environmental Indicators, please visit our site at: www.epa.gov/reg3wcmd/ca/correctiveaction.htm