Jump to main content

Contact Us

EPA On-line Tools for Site Assessment Calculation

Module Home Objectives Table of Contents Previous < Next >

9 of 45

Three Point Gradient Calculator

Planning the next phase of the investigation; delineation of the dissolved contaminant plumes, will require us to know the groundwater flow direction. After installing at least three monitoring wells and determining their relative elevation, we can use the three-point calculator to quickly give us both the direction and gradient of groundwater flow while in the field.

Calculator icon To use the three point gradient calculator, it is best to select three wells, which are widely separated and not aligned in any single direction. Let's try wells W1, W2 and W7. The well coordinates in map scale, using the lower left hand corner of the map as the origin (O,0), and the field measured groundwater elevation (casing elevation - depth to water)for these locations is as follows:
"Well Coordinates and Heads"
Well ID X-coordinate (ft) Y-coordinate (ft) head (ft)
W1 190 163 90.24
W2 138 153 90.27
W7 217 43 90.01

 
Previous Top ^ Next

Home | Glossary | Notation | Links | References | Calculators






Contact the Athens, GA Ecosystems Research Web editor to ask a question, provide feedback, or report a problem.

Jump to main content.