CADDIS Volume 4: Data Analysis
Exploratory Data Analysis
 What is EDA?
 Variable
Distributions  Scatterplots
 Correlation
Analysis  Conditional
Probability  Multivariate
Approaches  Mapping Data
 References
Multivariate Approaches: Details
 Variable clustering
 Principle component analysis
 Correlations and collinearity in multiple regression
 Stressor correlations in space and time
Author: D. Farrar
Multivariate Approaches for Exploring Associations Among Stressor Variables: Details
Basic multivariate visualization can be useful for understanding stressor correlations. Such an understanding can be helpful in dealing with issues such as confounding and collinearity that arise in evaluating multiple stressors.
For present purposes, this page emphasizes analysis of stressor variables and ignores biological response variables. Relevant resources are not reviewed comprehensively. Instead, a few basic methods are illustrated. Most of the methods considered here are discussed in Venables and Ripley (2004), and Crawley (2007), both of which are particularly useful for R implementations.
Variable clustering
An automated variable clustering method can be used to group variables
based on pairwise correlations. Figure 1 displays clustering results
generated using the varclus()
function
in the R contributed package Hmisc
(Harrell 2002), which provides hierarchical clustering based on
several measures of correlation. While the measures used for the
illustration do not distinguish between positive and negative
correlation, the bothbos
option would be specifically sensitive to
positive associations. R software, packages, and documentation are available for download
on the R web site.
Figure 1 displays clustering results using a dendrogram, a treelike
diagram. To form a dendrogram, clustering is initialized by joining
the pair of variables with the highest correlation (calcium
concentration [Ca] and specific conductivity [Cond], in the example).
Remaining variables are incorporated in steps. Each step initiates a
new cluster by combining two variables, adds a variable to an existing
cluster, or combines two clusters. The varclus
default decision at a
given step is the socalled completelinkage criterion: For any pair
of clusters, the algorithm uses only the maximum correlation over
pairs of variables with one variable in each cluster. Additional
options and details are described in R online documentation for
functions varclus
and hclust
(also see Venables and Ripley 2003 and Harrell 2002.)
Principal component analysis (PCA)
PCA is one of the most widely used multivariate statistical methods. The method is based on computation of summary variables that are weighted combinations of the original variables. (Each variable is multiplied by a weight and the weighed variables are added to form an index.) The summary variables computed in PCA are the principal components (PC), and the weights are loadings.
Figure 2 illustrates PCA based on two variables, calcium concentration (Ca) and conductivity (Cond). These variable were chosen for purely illustrative purposes, based on having a strong correlation. Each variable was transformed to logarithms and then standardized to have mean zero and variance one. Starting with the two variables Ca and Cond, PCA computes two summary variables, the PCs, which are uncorrelated. In this example, PC1 gives distance along an oblique axis where the points cluster. PC2 gives the displacement in a direction perpendicular to PC1. Evidently, the variance of PC1 is larger than the variance of PC2. The sum of variance of the two PCs is equal to the sum of variances for the original variables (in this case, 2). Thus we can say that each PC "accounts for" some percentage of variance. Indeed, in the example, the variance of PC1 scores is 1.39, so PC1 accounts for a fraction 1.39/2 = 69% of variance.
More generally (for 2 or more variables) the series of PCs, denoted PC1, PC2, and so on, account for nondecreasing fractions of the original variables. (The variance of PC1 is generally larger than, perhaps occasionally equal to, the variance of PC2, which is no smaller than that of PC3, and so on. The sum of the variances of the PCs is equal to the sum of variances for the original variables.) The number of PCs is no greater than the number of original variables. In practice, one usually achieves a dimension reduction, by using a few PCs that capture most of the variance of the original variables.
Results of PCA may be used in various ways in data analysis. Sometimes, a group of variables is combined into an index by computing PC1 (for example, as illustrated in the U.S.EPA Office of Water statistical primer). In regression analysis, a few PCs are sometimes used in place of the original variables, to avoid a collinearity problem.
For purposes of analyzing associations among biological stressors, we
emphasize interpretation of the PC loadings. Recall that these are
the weights assigned to individual variables that are combined to
compute a PC. Figure 3 displays loadings for a dataset that includes
calcium concentration and conductivity, as for Figure 2, and three
additional variables. Loadings, generated with R function
princomp
,
are displayed using the dotchart
function. A PC may be interpreted as
representing the variables with loadings with largest magnitudes
(positive or negative). In the example, PC1 appears to represent the
strongly correlated variables Ca and Cond. PC2 appears to represent high
total suspended solids (TSS) and fecal coliforms (FECAL) and low
dissolved oxygen.
Jolliffe (2002) treats PCA comprehensively, including PCA derivations that do and do not involve multivariate normality , relationships to factor analysis and other multivariate methods, PCA biplots (see below), use in regression analysis, outlierresistant methodology, choice of the number of PCs to interpret, applications to correlated data, and illustrations with applications to data from earth sciences.
Some graphical methods provide, in addition to visualization of relationships among variables, information on stressor profiles for individual sampling locations that may help the analyst to define regions or other groupings of sampling locations with distinctive stressor profiles.
Practical defaults and options for PCA
Running particular PCA software will usually require specifying a number of technical options. The following options are likely to generate useful results.

PCA is often applied to standardized variables because as a rule PCA should not reflect differences in the variance of different variables, especially for variables with measurement scales that are not commensurable. (To standardize a variable, subtract the mean value and then divide by the standard deviation. After standardization, the sample mean and variance equal zero and one respectively.) Some PCA programs have an option to run the analysis based on correlations (the alternative being to use covariances). Choosing the correlation option is equivalent to running the PCA on standardized variables, so that standardized variables do not need to be computed explicitly.

The number of PCs that the analyst should attempt to interpret is somewhat open to judgment although a number of criteria are available. Ordinarily the analyst will inspect a scree plot, in which the variances of sequential PCs (i.e., PC1, PC2,...) are graphed against indices 1, 2,... . A break in this relationship is sometimes taken to indicate the number of PCs to interpret. Another rule of thumb (for PCA applied to standardized variables) is to keep PCs that have variances no smaller than one.

More interpretable pattern of loading are sometimes be obtained by rotation, the most common rotation approach being varimax. With varimax rotation, some loadings will be closer to zero, so that the PC can be characterized more readily in terms of variables that contribute to a given PC. A reasonable variant is to rotate only a number of PCs judged to be of interest based on the unrotated PC variances (e.g., based on a scree plot). We suggest that as a rule the analyst will evaluate loadings with and without rotation. Loadings displayed in our figure appear interpretable, without rotation.

Applications emphasized here are exploratory in nature and do not strictly require distributional assumptions (see Jolliffe 2002). However, basic PCA is sensitive to outliers, and more useful results may sometimes be obtained by running the PCA based on rankbased or other outlierresistant correlations, such as Spearman's correlation, as suggested by Harrell (2002, p. 66). In practice, this may involve using a correlation matrix as input to a PCA program, instead of the original data. If Pearson's correlation is used, more useful results may be obtained with variables transformed to have nearly symmetric distributions. Sometimes this is accomplished using a transformation that is fairly standard for a given variable. The variables used in our figure are concentration variables, with no nondetects. We used a logarithmic transformation, which is somewhat conventional. Similar results were obtained with Spearman's correlation (which is unaffected by transformations).
Biplots
Certain techniques provide visualization of information on individual samples, along with information on variable correlations. Such visualization may be helpful, for example, in detecting groups of samples with similar stressor profiles, or in comparing sample locations with regard to position in a multidimensional stressor spaces. For PCA, it is common to plot the original samples as points, in a space defined by a few PCs, usually the 2dimensional space of PC1 and PC2.
The biplot approach (see Venables and Ripley 2003) provides
more specific information on the original variables, which are
displayed as vectors. The prefix "bi" refers to simultaneous display
of information on variable correlations and samples. The correlation
between two variables is represented, in the biplot, by the cosine of
the angle between two vectors. In particular, the correlation of two
variables is 1, 0, or 1, if the angle between the two in the biplot is 180,
90, or 0 degrees, respectively. Distances between points are multivariate distances
in the space of original variables. Categorical variables such as
watersheds or ecoregions may be
incorporated into the labels as points.
A free
Excel program
is available for generating biplots.
The biplot approach can be based
on multidimensional scaling, as well as PCA. Figure 4 illustrates the
use of the R function biplot.princomp()
.
Correlations and collinearity in multiple regression
In multiple regression, "collinearity" is a situation where some regressor variable can be approximated as a linear combination of other regressors. Basic regression methods cannot provide accurate inferences about the specific roles of variables that are involved in collinearity. Collinearity can result from some combination of correlations of variables in the population, or data that are few relative to the number of variables. Some regression texts emphasize that evaluation of regressor correlations early in a modeling effort can help the analyst to select a set of candidate predictors in such a way that collinearity problems are minimized (Draper and Smith 1981, Ch. 8; Harrell 2002).
Stressor correlations in space and time
Biological monitoring data is ordinarily obtained by sampling a set of environmental locations, on multiple occasions over time. Whereas autocorrelation generally needs to be taken into account for statistical tests and confidence intervals, Jolliffe (2002) suggests that useful results may be obtained by analyzing data from all locations and occasions at once, using a simple PCA, followed by characterization of the spatial and temporal patterns from plots of the most important PCs. A specialized variant of PCA for application to spacetime data is the method of empirical orthogonal functions (EOFs; Banerjee et al. 2004, Jolliffe 2002).
Return to Multivariate Approaches for Exploring Associations Among Stressor Variables