Technology Transfer Network
Geographic / Ecosystems Initiatives

Detroit Edison Company

Name of the facility:
```
Detroit Edison Company
```
Location:
```
3500 Front Street, Monroe, MI
```
Distance from the US/Canada border:
```
about 25 km
```

Type/size of the facility:

proposed upgrade to the existing low-NOx burners 
   (Boiler 3) with more efficient ones

Source of emissions:
```
Boiler # 3 (output 795MW)
```
Type of fuel:
```
natural gas, coal
```

Type/quantity of mass emission rates

SO2 - 1.6 lb/MMBTU (this limit is a combined limit for 
      Boilers 1, 2, and 4), 
PM - 0.12 lb/1,000 lb at 50% excess air.

Emission control technology

Low NOx burners, dry wire electrostatic  
precipitator, SO3 flue gas conditioning system, 
selective catalytic reduction  system.

Date permit application received:
```
06/29/2006
```

Stack height and diameter:

The stacks' minimum heights above ground level and maximum 
diameters are in concordance with 40 CFR 52.21 Subparts (c) and (d) 
(maximum diameter is 336 in and minimum height 805 ft)

Permit agency's contact name, address, telephone number:

David Riddle
Michigan Department of Environmental Quality, 
Air Quality Division, 
Constitution Hall, 
525 West Allegan Street
PO Box 30260
Lansing, MI, 48909 - 7760
Tel. 517 373 - 7081

Detroit Edison Company

Area Navigation