Technology Transfer Network - Air Toxics Web Site
Rule and Implementation Information for the Metal Furniture Surface Coating NESHAP
On this page:
Proposed and Promulgated Rules
Subpart RRRR - National Emission Standards for Metal Furniture Surface Coating Operations
|05/23/03||68 FR 28605||Final Rule||Original Promulgation|
|04/24/02||67 FR 20206||Proposed Rule||Original Proposed Rule|
Technical Support Document/Response to Comments
|1/03||Metal Furniture Surface Coating Background Information for Promulgated Standards (EPA-453/R-03-002)||10/01||Metal Furniture Surface Coating Background Information for Proposed Standards (EPA-453/R-01-010)|
|3/13/03||FACT SHEET - Technical - Promulgated Rule||3/19/02||FACT SHEET - Technical - Proposed Rule|
Source Identification and Location Information
|2000||Potentially Affected Source List for Metal Furniture Coating [not for regulatory use]||Potentially Affected Source Metal Furniture Totals by State [Map]|
|12/03||Overview Brochure (tri-fold)||12/03||Compliance Timeline|
Example Notices and Reports
Example notification and report forms have been developed for sections 63.9 and 63.10 of part 63, Subpart A, General Provisions. You can find these example forms by going to the General Provisions rule page.
Although most standards reference sections 63.9 and 63.10 of the General Provisions for some or all of their notification and reporting requirements, please be aware that these General Provisions example forms are not intended to exactly match all the requirements of a specific standard. Specific standards may include or exclude General Provision requirements or can require additional information beyond Subpart A. For this reason, these example report forms developed under Subpart A should be treated as examples only and may be useful to users as a starting point for developing report forms that are facility and MACT specific.
Compliance and Enforcement Information
Applicability Determination Index (ADI). The ADI is maintained by EPA's Office of Enforcement and Compliance Assurance (OECA) and provides a data base of memoranda dealing with applicability issues. The database is searchable by Subpart.
EPA's Office of Enforcement and Compliance Assurance (OECA) has created several Compliance Assistance Centers that service the coating industry. Each Center address real world issues faced by a specific industry. The Centers deliver information in many forms: Internet Web sites, telephone assistance lines, fax-back systems, and e-mail discussion groups.
Environmental Compliance Assistance Clearinghouse. This innovative web site provides quick access to compliance assistance tools, contacts, and planned activities from US EPA, its partners, and other compliance assistance providers.
The Environmental Council of the States. The website provides state delegation information for environmental programs.
Iowa Waste Reduction Center - Since 1988, the IWRC has helped small businesses comply with federal and state environmental regulations and pollution prevention initiatives. By incorporating on-site reviews, applied research, and hands-on training into its free and confidential assistance program, the IWRC offers complete compliance assistance that small businesses can understand and apply.
Coating Alternatives Guide (CAGE). CAGE is a pollution prevention tool which provides information on low-emitting alternative coating technologies to coatings users. CAGE currently addresses alternative, low-emitting coatings for metal and plastic part coating operations, but, future versions will address alternative coatings for wood, and other substrates.
NOTE: Most links on this page are pointers to other hosts and locations in the Internet. This information is provided as a service; however the U.S. Environmental Protection Agency does not endorse, approve or otherwise support these sites.