U. S. ENVIRONMENTAL PROTECTION AGENCY

OFFICE OF AIR QUALITY PLANNING & STANDARDS

EMISSION STANDARDS DIVISION

RESEARCH TRIANGLE PARK, NC 27711

COVER SHEET

DATE:	2/27/98

TO:	Persons Interested in the Development of the Metal Furniture Integrated Rule Development: Presumptive MACT/BAC Phase

FROM:	Dr. Mohamed Serageldin

VOICE PHONE:	919-541-2379

FAX PHONE:	919-541-5689

E-Mail	e-mail: serageldin.mohamed@epamail.epa.gov

OFFICE:	U.S. ENVIRONMENTAL PROTECTION AGENCY

OFFICE OF AIR QUALITY PLANNING & STANDARDS

EMISSION STANDARDS DIVISION

RESEARCH TRIANGLE PARK, NC 27711

MESSAGE:

RE:	METAL FURNITURE INTEGRATED RULE DEVELOPMENT

NOTICE OF THIRD WORK TEAM MEETING

WHEN:	Thursday, March 19, 1998

9:30 am - 4:00 pm

WHERE:	EPA Environmental Research Center Building

Research Triangle Park, North Carolina

Classroom 2

CALL-IN NUMBER: (919) 541-4486

This meeting notice is provided for your convenience so that you can make the necessary scheduling and travel arrangements as soon as possible. If you plan to attend the meeting, please notify Dr. Serageldin by phone, fax, or e-mail. A call-in phone number has been provided for those persons unable to attend the meeting in Research Triangle Park.

The primary focus of the meeting will be the draft Information Collection Request (ICR). A general discussion of the types of questions that will be asked in the survey is planned. A draft copy of the ICR and a meeting agenda will be posted on the TTN website (see below) prior to the workteam meeting. The format of the draft ICR may change prior to its final issuance, although the general types of questions asked will remain the same.

The meeting will be held from 9:30 am to 4:00 pm in Classroom Number 2 of the EPA Environmental Research Center (ERC) Building located at Alexander Drive and N.C. Highway 54 in Research Triangle Park, NC. The local airport is Raleigh/Durham (RDU).

DIRECTIONS FROM DURHAM:	Take Route 147 "Durham Freeway" South until the Freeway ends at Alexander Drive. Turn right on Alexander Drive and proceed through the first stoplight (N.C. Highway 54). The ERC Building will be on your left on the corner of Alexander Drive and N.C. Highway 54. Turn left into the first entrance after crossing N.C. Highway 54 and follow the signs to the visitor parking area.

DIRECTIONS FROM RALEIGH and RDU AIRPORT: Take I-40 West to exit 279-A (Route 147 South, To Alexander Drive). Follow Route 147 until it ends (less than 1 mile) at Alexander Drive. Turn right on Alexander Drive and proceed through the first stoplight (N.C. Highway 54). The ERC Building will be on your left on the corner of Alexander Drive and N.C. Highway 54. Turn left into the first entrance after crossing N.C. Highway 54 and follow the signs to the visitor parking area.

DIRECTIONS FROM POINTS WEST: Take I-85 North to I-40 East. From I-40 East, take Exit 279-A (Route 147, Durham Freeway To Alexander Drive). Follow Route 147 until it ends (less than 1 mile) at Alexander Drive. Turn right on Alexander Drive and proceed through the first stoplight (N.C. Highway 54). The ERC Building will be on your left on the corner of Alexander Drive and N.C. Highway 54. Turn left into the first entrance after crossing N.C. Highway 54 and follow the signs to the visitor parking area.

Updates for this project will be on the OAQPS Technology Transfer Network (TTN): http://www.epa.gov/ttn/uatw/coat/mfurn/met_furn.html

FUTURE UPDATES WILL BE ON THE TTN AT THE SAME LOCATION.